aDAVitya logo

Robo FIFA

Robotic Car Specifications

  • Maximum allowed dimensions of the Robotic Car must exceed 30cm*30cm*25cm (L*B*H)
  • Robotic Car may be wired of wireless. For wired car, the length of wire should be long enough to cover the whole track.
  • Only wheels are allowed for locomotion, conveyer belts may be used. Flying or jumping of car is not allowed.
  • The Car must not emit smoke or fire, leak, stain or soil, spray, throw or use projectiles.
  • The weight of the robotic car should not be more than 2kgs (excluding power source).
  • The Power supply to be used should not exceed 15V
  • Readymade toy cars are not allowed.
  • Car can have maximum 6 DC motors.
  • At all times, the robotic car’s behavior should be non-offensive, non-destructive and non-harmful to humans as well as track.
  • Internal combustion engine cannot be used.
  • Use of engines or compression is not allowed. The robotic car must depend only on motors for its propulsion and control.
  • The person who has made the robot should be able to explain the circuit of it.

Team Specifications:

  • Each team can have maximum of 3 members. Students from different colleges can form a team.
  • Entry Fees for a team is Rs 100/-
  • Each member of team must contain identity card of his/her respective institute.
  • Any unethical behavior could lead to disqualification. The organizers have all the rights to take final decision for any matter during the event.

LEVEL 1 - ROBOFIFA

  • Level 1 is a football match between the robotic cars made by the team members.
  • A platform of dimensions 10ft * 8ft will be provided for the match.
  • Two Goals points will be there at the each side.
  • Time of the match is 7 minutes.
  • One point will be given for 1 goal
  • If there is a tie up between 2 teams, then there will be a tie-up match between them in which the team whose car makes first goal will be the winner. This match will be of maximum 5 minutes. If no robots is able to make any goal, then both teams will be disqualified.

LEVEL 2 – TECHNO RACE

  • A track having obstacles will be there.
  • There will be balloons in the track. Extra benefit of 10 seconds will be given to the team for each balloon the robot bursts.
  • That team will be the winner whose robotic car takes least time to reach the end of the track.
  • There will be certain obstacles in down, seesaw, balloon pit, etc. and the race track will try to slowdown the robotic car.
  • The track surface may have unevenness.
  • Track width is 1to 2 feet.
  • There might be abrupt angles in the track.
  • Three hand touches are allowed with a penalty of 30 seconds. For each hand touch, penalty time will be added further to the overall time required by the robot for completion of specified round.
  • If any robot starts off before start up call, the counter would be restarted and the machines will get second chance. If repeated again, then team will be disqualified.

Event Details

Team size:
1(min) and 3(max)

Coordinators:

Harsh Singh Sahni
Kapil Kukkar